XMC-7KWP: User-Configurable Kintex-7 FPGA Modules with Dual SFP+ Ports
Please sign in or register to see model options and to add products to your cart.
Product short description:
- XMC module
- Kintex-7 FPGA
- 10-Gigabit Ethernet
- Write-protected flash
Acromag’s XMC-7KWP modules feature a high performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high throughput serial interface.
XMC-7KWP: User-Configurable Kintex-7 FPGA Modules with Dual SFP+ Ports Description
Acromag’s XMC-7KWP modules feature a high performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high throughput serial interface.
The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.
The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing. For security, the FPGA’s configuration flash is write-protected.
Two versions of this module are available, offering a choice of an FPGA device with 325k or 410k logic cells.
Front I/O adds dual SFP+ ports and a VHDCR connector. The two SFP+ ports each provide a copper or fibre interface of up to 10.3125Gbps. They also support a Gigabit Ethernet interface. The VHDCR connector interfaces JTAG, USB, and 22 SelectIO.
The rear I/O provides 4-lane high-speed serial interface on the P16 XMC port for customer-installed soft cores. P16 also supports 34 SelectIO channels. The P4 port adds another 60 SelectIO and global clock lines. SelectIO signals are Kintex-7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL).
With Acromag’s Kintex-7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.
These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating high-speed programmable logic with the flexibility of software running on MicroBlaze™ soft processors.
Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board debugging. Additional Xilinx tools help finish your system faster.
Maximize FPGA performance with Vivado® or ISE® Design Suite. And with ChipScope™ Pro tools, you can rapidly debug logic and serial interfaces.
Learn more about FPGA modules and see all models >
XMC-7KWP: User-Configurable Kintex-7 FPGA Modules with Dual SFP+ Ports Features & Benefits
- Reconfigurable Xilinx Kintex-7 FPGA with 325k or 410k logic cells
- 128M x 64-bit DDR3 SDRAM
- 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
- FPGA bitstream storage flash write-protected unless access jumper installed
- 8-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidI/O, 10Gb Ethernet, Xilinx Aurora
- 4-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
- Dual SFP+ ports for Fibre Channel or 10GbE
- 60 SelectIO or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
- 34 SelectIO or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
- 22 SelectIO, 2 global clock pairs, JTAG, USB, and ground signals via front 36-pin connector
- DMA support provides data transfer between system memory and the on-board memory
- Support for Xilinx ChipScope™ Pro interface
-
5028-452: 2.125 Gb/s Short-Wavelength SFP Transceiver
Acromag provides 2.125 Gb/s Short Wavelength SFP Transceiver that is compatible with the Gigabit Ethernet standard as specified in IEEE Std 802.3 and Fibre Channel FC-PI-2 Rev. 5.0. It is RoHS compliant and lead-free. The Acromag part number is 5028-452. -
5028-455: 1000BASE-T Copper SFP Transceiver
Acromag offers a SFP Transceiver that is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. It is RoHS compliant and lead-free. The Acromag part number is 5028-455. -
TAPCABLE1M: SFP+ Direct Attach Cable: SFP+ Cable, SFP+-to-SFP+ (Male-Male) Connectors
Acromag offers a 1 meter cable that connects one SFP+ port to another SFP+ port. This cable supports speeds up to 10 Gbps. The Acromag part number is TAPCABLE1M. -
5025-921: VHDCI Cable
Acromag provides a cable that brings the 36 pins of the VHDCI front I/O connector out to a 50 pin SCSI connector. Front VHDCI Field I/O Pin Connections. The Acromag part number is 5025-921. -
XMC-7KA-EDK: Engineering Design Kit
Acromag provides an engineering design kit for the XMC-7K and XMC-7A series products, a “must buy” for first time XMC-7K/XMC-7A series module purchasers.
Additional information
Weight | 8 oz |
---|---|
Dimensions | 7 × 4 × 1 in |
Part Number: | XMC-7KWP-325F: 325k logic cells, XMC-7KWP-410F: 410k logic cells |
Product Series | Kintex-7 Series |
Logic Cells | 326k, 406k |
FPGA Type | Xilinx Kintex-7 |
-
Description
XMC-7KWP: User-Configurable Kintex-7 FPGA Modules with Dual SFP+ Ports Description
Acromag’s XMC-7KWP modules feature a high performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high throughput serial interface.
The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.
The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing. For security, the FPGA’s configuration flash is write-protected.
Two versions of this module are available, offering a choice of an FPGA device with 325k or 410k logic cells.
Front I/O adds dual SFP+ ports and a VHDCR connector. The two SFP+ ports each provide a copper or fibre interface of up to 10.3125Gbps. They also support a Gigabit Ethernet interface. The VHDCR connector interfaces JTAG, USB, and 22 SelectIO.
The rear I/O provides 4-lane high-speed serial interface on the P16 XMC port for customer-installed soft cores. P16 also supports 34 SelectIO channels. The P4 port adds another 60 SelectIO and global clock lines. SelectIO signals are Kintex-7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL).
With Acromag’s Kintex-7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.
These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating high-speed programmable logic with the flexibility of software running on MicroBlaze™ soft processors.
Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board debugging. Additional Xilinx tools help finish your system faster.
Maximize FPGA performance with Vivado® or ISE® Design Suite. And with ChipScope™ Pro tools, you can rapidly debug logic and serial interfaces.
Learn more about FPGA modules and see all models >
XMC-7KWP: User-Configurable Kintex-7 FPGA Modules with Dual SFP+ Ports Features & Benefits
- Reconfigurable Xilinx Kintex-7 FPGA with 325k or 410k logic cells
- 128M x 64-bit DDR3 SDRAM
- 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
- FPGA bitstream storage flash write-protected unless access jumper installed
- 8-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidI/O, 10Gb Ethernet, Xilinx Aurora
- 4-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
- Dual SFP+ ports for Fibre Channel or 10GbE
- 60 SelectIO or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
- 34 SelectIO or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
- 22 SelectIO, 2 global clock pairs, JTAG, USB, and ground signals via front 36-pin connector
- DMA support provides data transfer between system memory and the on-board memory
- Support for Xilinx ChipScope™ Pro interface
-
Specs & Data Sheets
-
Software
XMC-7KA-EDK: Engineering Design Kit Information Page (Log in to download the file)PCISW-API-LNX: Linux Support Driver Download (Log in to download the file)PCISW-API-WIN: Windows Support Driver Information Page (Log in to download the file)PMCSW-API-VXW: VxWorks Support Driver Information Page (Log in to download the file) -
Accessories
-
5028-452: 2.125 Gb/s Short-Wavelength SFP Transceiver
Acromag provides 2.125 Gb/s Short Wavelength SFP Transceiver that is compatible with the Gigabit Ethernet standard as specified in IEEE Std 802.3 and Fibre Channel FC-PI-2 Rev. 5.0. It is RoHS compliant and lead-free. The Acromag part number is 5028-452. -
5028-455: 1000BASE-T Copper SFP Transceiver
Acromag offers a SFP Transceiver that is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. It is RoHS compliant and lead-free. The Acromag part number is 5028-455. -
TAPCABLE1M: SFP+ Direct Attach Cable: SFP+ Cable, SFP+-to-SFP+ (Male-Male) Connectors
Acromag offers a 1 meter cable that connects one SFP+ port to another SFP+ port. This cable supports speeds up to 10 Gbps. The Acromag part number is TAPCABLE1M. -
5025-921: VHDCI Cable
Acromag provides a cable that brings the 36 pins of the VHDCI front I/O connector out to a 50 pin SCSI connector. Front VHDCI Field I/O Pin Connections. The Acromag part number is 5025-921. -
XMC-7KA-EDK: Engineering Design Kit
Acromag provides an engineering design kit for the XMC-7K and XMC-7A series products, a “must buy” for first time XMC-7K/XMC-7A series module purchasers.
-
-
Additional information
Additional information
Weight 8 oz Dimensions 7 × 4 × 1 in Part Number: XMC-7KWP-325F: 325k logic cells, XMC-7KWP-410F: 410k logic cells
Product Series Kintex-7 Series
Logic Cells 326k, 406k
FPGA Type Xilinx Kintex-7
Please login to submit this form.